US Speedo Daytona Series Gauge Face Overlay Chevy Cobalt 2005-2010

US Speedo Daytona gauge face overlay for the Chevy Cobalt 2005-2010.

US Speedo is based in Flint Michigan.

US Speedo has designed their Daytona Edition color gauge face overlay to directly replace the existing factory installed instrument face plate. Color gauge face overlays are custom fit to your vehicle to ensure a perfect fit that will not affect nighttime illumination. Installation takes about 30 minutes and requires not cutting or wiring.

Match your interior and exterior color scheme to your instrument clustor. US Speedo offers a hugh selection of overlay colors to match your exterior paint job or your interior color scheme. Choose from White, Silver, Yellow, Blue, Red, Purple, Pink or Orange gauge overlay.

All gauge face overlays are made from a fade resistant high impact, lightweight and flexible polycarbonate materials. All face overlay kits come with complete detailed instructions and a needle removal tool. If you run into problems during the installation process US Speedo offers free phone-in tech support.

Some mechanical experience is helpful but not necessary when installing the face overlay. This is a good first project for those just starting the custom modification process.

Plus, you have a huge selection of colors to choose from. That means you are sure to find a Color Face Overlay to match your paint job or your personal tastes.
You will need to match the overlay mph to your current speedometer mph to ensure you have the right calibration. For instance if your current speedometer tops out at 120mph then make sure you order a 120 mph model overlay and if you have a 140 mph then order the 140 mph model.

US Speedo gives you a 12 month warranty on all face overlays.

First choose a 120mph or 140mph gauge overlay both go to 8000rpm, second choose your color white, silver, yellow, blue, red, purple, pink or orange.

US Speedo COB06 120mph Gauge Face Overlay, Chevy Cobalt 05-10 $99.99
US Speedo GC14007 140mph Gauge Face Overly, Chevy Cobalt 05-10 $109.99

Fujita Cold Air Intake Chevy Cobalt 05-09

Fujita Cold Air Intake Chevy Cobalt 05-09.

Each cold intake systems is made with 6061 T6 Aluminum Alloy and polished to an extremely bright finish. Carbon Plated T-bolt Clamps (unless linear clamps are called for) are used due to their strength and reliability. T-bolt Clamps either meet or exceed the SAE Spec. J1508. CNC machined air mass sensor fittings are used to ensure proper cold air/fuel ratios. Sensors are engineered for accuracy. Reinforced Silicone Hose are used to provide stability during both extreme hot and cold conditions, -65°F(-54°C) to +500°F (+260°C). Each Intake System come withs a Super Flow High Performance Filter™ designed to maximize efficiency without compensating air filtration.

Increase your Cobalt's power and performance with the addition of a Cold Air Intake System.

Automotive Cold Air Intake systems perform a vital role in the performance of your Chevy Cobalt. A cold air intake system replaces the restrictive factory filter and air intake housing that is located in your engine compartment.
Don't hesitate any longer, install a Cold Air Intake System and experience first hand what improved power and torque feel like.

Fujita CA-1415 Chevy Cobalt 2.2L 05-09 $237.69
Fujita CA-1416 Chevy Cobalt SS/SC 05-06 $246.24

Made with 6061 T6 Aluminum Alloy
Carbon Plated T-Bolt Clamps unless Linear Clamps are Called For
CNC Machined Air Mass Sensor Fittings
Reinforced Silicon Hose
TIG Welded Brackets
Fujita Super Flow High Performance Filter Included
Vibration Mounts

Pacesetter Performance Exhaust Header

Pacesetter Performance Exhaust Header Chevrolet Cobalt 05-06.

Hook up your Cobalt with a performance enhancing Pacesetter Performance Exhaust Header. Installing this header will not only squeeze out more horsepower but your Cobalt will perform at a higher level. Pacesetter Exhaust Headers perform a very important function for your engine, it releases hot air from you cylinder heads and they also produce a throaty sound. Coupled with a cold air intake system, a non restrictive cat-back exhaust system and a performance chip you will notice immediate gains in performance and torque and you'll be the hit of the street.

Pacesetter makes these from mandrel bent mild steel tubing which eliminates kinks in the bends. There are no protrusions inside the pipes that would impede exhaust flow to the exhaust system. Pacesetter comes with thick flanges made of steel and machined drilled bolt holes that line up with the holes in your heads for a perfect fit and easy do it yourself installation. All Pacesetters can be ordered with a ceramic coated finish or black painted finish.

Get started on your way to a performance enhanced custom Cobalt with the installation of a Pacesetter Header.

Note not legal for use on catalyst-equipped vehicles. Pre catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle.

Pacesetter 70-1272 Header Black Chevy Cobalt 2.2L 05-06
Pacesetter 70-1273 Header Black Chevy Cobalt SS/SC 2.0L 05-06
Pacesetter 72C1272 Header ArmorCoat Chevy Cobalt 2.2L 05-06
Pacesetter 72C1273 Header ArmorCoat Chevy Cobalt SS/SC 2.0L 05-06

Pacesetter Headers reduce under hood temperature and resists rust and corrosion

All Pacesetter Headers come with a 3 Year Warranty

Pacesetter ArmorCoat will not discolor providing a long lasting great look

All Pacesetter Headers come with hook ups for smog and engine management sensors

All Pacesetter Exhaust Headers come with all necessary hardware, gaskets, illustrated
instructions and 0.375 inch standard head flange

Comes with extension to connect to stock system

ArmorCoat is a 2000 Degree Fahrenheit high temperature metallic ceramic finish

Available in Ceramic ArmorCoat or Black Paint