Chevy Cobalt Sprint Lowering Springs
Spring 3350
Sprint Suspension Springs
Chevy-Cobalt-Sprint-Lowering-Springs
Sprint The Leader in Performance Suspension Cobaltmania.com is proud to offer their Lowering Springs for the Chevrolet Cobalt
Chevy Cobalt | Lowering Springs | Sprint Performance Suspension
Chevy Cobalt 05-09 Sprint Lowering Springs.
You’ve come to the point where you want to improve your Cobalt’s ride quality by installing a set of lowering springs. Not only will your ride quality improve but your center of gravity will be lowered giving your Cobalt that aggressive stance. There is only one way to do this that is economically, that is to install a set of quality performance enhancing Lowering Springs. There are many manufacturers’ out there that are putting out quality lowering springs. Your decision to purchase from one manufacturer boils down to reputation, quality, workmanship and cost. By choosing these lowering springs from Sprint you can rest assured that their 30 plus years of in-house design and engineering will bring you the best quality springs for the price. Sprint Springs give you quality, provides you ride comfort and lowers your ride height all at an attractive price: a true winning combination..
Sprint Suspension Springs are manufactured in the United States and Canada. They are cold wound with SAE 9254 chrome silicon steel on top of the line automated precision CNC coiling machines. These springs are normally 20-25% stiffer than factory stock springs. Spring rate or spring stiffness will influence your Cobalt’s handling characteristics. They will lower you Cobalt approximately 1.60 inches in the front and 1.90 inches in the rear. These springs provide aggressive handling for the performance driver.
All springs are shot-peened, heat treated, pre-set, inspected, tested and performance powder coated in house to ensure a lifetime of durability and enhanced driving performance.
After installing lowering springs you will immediately notice improved handling characteristics that offer you a more aggressive driving experience.
Spring Performance Suspension also manufactures perfect matching suspension component strut tower bars and camber alignment kits.
Sprint Performance Suspension Lowering Springs are ISO 9001 Certified.
Don't be misled by other companies claiming to be "Just Like Sprints," Sprint Performance Suspension…there is a difference!
Thursday, November 12, 2009
Wednesday, November 11, 2009
Chevy Cobalt TWM Performance Short Shifter
Chevrolet Cobalt TWM Performance Short Shifter.
Enjoy a shorter, much more precise shift pattern in your Chevy Cobalt with a TWM Performance short shifter. Shift throw or distance between gears on the Chevrolet Cobalt is reduced by 33% to 38% depending on model and shift knob height is shortened by 1 inch to 2 Inches depending on model. This allows for very smooth and precise movement through the gears. This short shifter also retains the reverse lockout feature and is available with optional aluminum shift base bushings for a more solid and direct shift feel.
This short shifter also comes standard with an aluminum shift knob specifically designed to accommodate the reverse lock out. The shift knob can be upgraded to a weighted stainless steel shift knob for an even smoother shift feel.
This short shifter also resolves common issues that other short shifters on the market have such as reverse lock out movement. Delrin bushings and o-rings for super smooth reverse lock action are used to correct this annoying occurrence.
Also referred to as a short throw shifter the short shifter is a performance enhancing replacement for the stock long throw manual shifter installed at the factory. The OEM shifter are designed for the masses and are not accommodating for the enthusiast who demands performance.
The main purpose of a short throw shifter is to mechanically reduce the time it takes to change from one gear to another.
With this reduction in time you will be able to shift from one gear to another in a fraction of the time it takes you now using a made for the masses factory stock unit.
You and your Chevy Cobalt deserve the best and now is the time to upgrade the performance and feel of your transmission.
Super Smooth Reverse Lock Available for SS/SC and SS/TC
Reduces Shift Knob Height
4506 Reduces Throw by 38% and Knob Height by 2 Inches
4507 Reduces Throw by 33% and Knob Height by 1 Inch
Delrin Bushings and O-Rings Used
Comes Standard with an Aluminum Shift Knob
Visit us at cobaltmania
Enjoy a shorter, much more precise shift pattern in your Chevy Cobalt with a TWM Performance short shifter. Shift throw or distance between gears on the Chevrolet Cobalt is reduced by 33% to 38% depending on model and shift knob height is shortened by 1 inch to 2 Inches depending on model. This allows for very smooth and precise movement through the gears. This short shifter also retains the reverse lockout feature and is available with optional aluminum shift base bushings for a more solid and direct shift feel.
This short shifter also comes standard with an aluminum shift knob specifically designed to accommodate the reverse lock out. The shift knob can be upgraded to a weighted stainless steel shift knob for an even smoother shift feel.
This short shifter also resolves common issues that other short shifters on the market have such as reverse lock out movement. Delrin bushings and o-rings for super smooth reverse lock action are used to correct this annoying occurrence.
Also referred to as a short throw shifter the short shifter is a performance enhancing replacement for the stock long throw manual shifter installed at the factory. The OEM shifter are designed for the masses and are not accommodating for the enthusiast who demands performance.
The main purpose of a short throw shifter is to mechanically reduce the time it takes to change from one gear to another.
With this reduction in time you will be able to shift from one gear to another in a fraction of the time it takes you now using a made for the masses factory stock unit.
You and your Chevy Cobalt deserve the best and now is the time to upgrade the performance and feel of your transmission.
Super Smooth Reverse Lock Available for SS/SC and SS/TC
Reduces Shift Knob Height
4506 Reduces Throw by 38% and Knob Height by 2 Inches
4507 Reduces Throw by 33% and Knob Height by 1 Inch
Delrin Bushings and O-Rings Used
Comes Standard with an Aluminum Shift Knob
Visit us at cobaltmania
Tuesday, October 27, 2009
Triple Pod Pillar Installation
You just purchased 3 2 1/6th inch gauges for the interior of your Chevrolet Cobalt. Now what. Well you have few choices when it comes to mounting them, 1st choice is to use mounting brackets and attach them anywhere you can, 2nd choice is to have a custom setup made, and the 3rd choice is to purchase an Auto Meter triple A pillar pod and install it yourself. I highly recommend the 3rd choice as it is in-expensive and an easy process.
I will attempt to take you through a typical triple A pillar pod Autometer 12205 installation with a vacuum/boost gauge Autometer 6103, a wide band air/fuel sensor Autometer 6178 and a fuel pressure gauge Autometer 6163.
1. Locate the factory A pillar trim on the driver’s side of your Cobalt, grab hold of it and give it a firm tug. If you feel the need to pry it off be sure to use tools that cannot mar or otherwise damage other parts of your car.
2. Label both ends of each gauge wire and then attach them small zip ties to the existing wires running up the pillar. Be sure that you have the correct ends to hook to the gauges at the pillar openings.
3. Locate the gauges’ lighting wires and solder them together and wire into the dash light dimmer switch.
4. Locate the gauges’ power supply wires and wire them into a constant on 12 volt ignition source.
5. Mount ground wires to the body, choose an appropriate place somewhere behind the dash.
6. Feed the wires for the boost and fuel pressure gauge through a new grommet in the firewall somewhere behind the dash. For this you will need to find an appropriate position where you can drill the recommended hole size for the grommet through the firewall without any obstructions. Now, install the waterproof grommet. To feed the wires through the grommet into the engine compartment you will need to cut the ends of the plugs off. Once you have the wire through the grommet re-solder the plug ends on. This is where labeling each of wires comes in handy.
7. The wires for the air/fuel meter need to be fed through expandable sheathing and then passed through a new grommet on the floor. Be sure to choose an appropriate place and drill the recommended size hole for the grommet. Feed the wire though the grommet and install the wide band 02 sensor in the manufacturers recommend place.
8. Attach the 2-bar MAP and the fuel pressure sending unit per manufacturer’s instructions.
9. Mark the location of each wire on the factory pillar and use a suitable tool to cut a hole to accept each gauge wire.
10. Re-install the factory pillar ensuring each gauge wire end protrudes through.
11. Attach double sided trim tape to the triple pod pillar and use a bit of high-melt hot glue at the top of the pillar and then lock it into place.
12. Attach each gauge to appropriate labeled wire and insert the each gauge into the pod position with a bit of pressure.
The auto meter pillar pod comes in dual and triple gauge configurations. The pillar is black but can easily be painted before installation to match your Cobalt’s interior color scheme.
I will attempt to take you through a typical triple A pillar pod Autometer 12205 installation with a vacuum/boost gauge Autometer 6103, a wide band air/fuel sensor Autometer 6178 and a fuel pressure gauge Autometer 6163.
1. Locate the factory A pillar trim on the driver’s side of your Cobalt, grab hold of it and give it a firm tug. If you feel the need to pry it off be sure to use tools that cannot mar or otherwise damage other parts of your car.
2. Label both ends of each gauge wire and then attach them small zip ties to the existing wires running up the pillar. Be sure that you have the correct ends to hook to the gauges at the pillar openings.
3. Locate the gauges’ lighting wires and solder them together and wire into the dash light dimmer switch.
4. Locate the gauges’ power supply wires and wire them into a constant on 12 volt ignition source.
5. Mount ground wires to the body, choose an appropriate place somewhere behind the dash.
6. Feed the wires for the boost and fuel pressure gauge through a new grommet in the firewall somewhere behind the dash. For this you will need to find an appropriate position where you can drill the recommended hole size for the grommet through the firewall without any obstructions. Now, install the waterproof grommet. To feed the wires through the grommet into the engine compartment you will need to cut the ends of the plugs off. Once you have the wire through the grommet re-solder the plug ends on. This is where labeling each of wires comes in handy.
7. The wires for the air/fuel meter need to be fed through expandable sheathing and then passed through a new grommet on the floor. Be sure to choose an appropriate place and drill the recommended size hole for the grommet. Feed the wire though the grommet and install the wide band 02 sensor in the manufacturers recommend place.
8. Attach the 2-bar MAP and the fuel pressure sending unit per manufacturer’s instructions.
9. Mark the location of each wire on the factory pillar and use a suitable tool to cut a hole to accept each gauge wire.
10. Re-install the factory pillar ensuring each gauge wire end protrudes through.
11. Attach double sided trim tape to the triple pod pillar and use a bit of high-melt hot glue at the top of the pillar and then lock it into place.
12. Attach each gauge to appropriate labeled wire and insert the each gauge into the pod position with a bit of pressure.
The auto meter pillar pod comes in dual and triple gauge configurations. The pillar is black but can easily be painted before installation to match your Cobalt’s interior color scheme.
Sunday, June 7, 2009
RKSport Ram Air Hood for the Chevy Cobalt
RKSport Ram-Air Hood for the Chevy Cobalt, all 2 door and 4 door models, 05-08, 12011000.
Up style the exterior appearance of your Cobalt with the purchase and installation of a performance enhancing and street styling RKSport Ram-Air Hood. Set your Cobalt apart from all the other street machines on the scene and at the same time unleash the sports car that's hidden inside your Cobalt with the addition of the RKSport Ram Air Hood.
R.K. of RKSport Inc, has an extensive racing background and realized early on that having the best designers and technical experts on the team makes for a winning program in both racing and business. In 1992 R.K. co-founded Swift Cars and started developing the Swift Formula Ford. In 1993 with his experiences both on and off the track, R.K. founded RKSport, Inc. a leader in after market aerodynamic styling elements for the street and the track.
RKSport's best in-house designers have, once again, outdone themselves with the designing of this very stylish and functional Ram-Air Hood which will not only sets your Cobalt apart from the crowd but also offers you added performance by increasing your Cobalt's horsepower by channeling and ramming more air into the throttle body.
The RKSport Ram-Air Hood was designed to minimize drag, and to be the most efficient ram-air hood on the market at collecting and ramming air into the throttle body thereby increasing horsepower and performance.
Constructed from hand laid up, high impact fiberglass, RK Sport's fully functional Ram-Air Hood will fit all 05-Up 2-door and 4-door Cobalts.
All RKSport products come with OEM style mounting hardware if required and detailed instructions for easy installation.
All RKSport Ram-Air Hood are manufactured from the highest quality fiberglass obtainable for flexibility, durability and impact resistance.
Cobaltmania.com has a full line of RKSport exterior styling products for the Chevy Cobalt.
Cobaltmania.com where the customers come first.
The RKSport Ram-Air Hood is constructed of high quality high impact fiberglass
The RKSport Ram-Air Hood sets your Cobalt apart from the crowd
The RKSport Ram-Air Hood rams more air into your throttle body
The RKSport Ram-Air hood increases horsepower
The RKSport Ram-Air hood a performance enhancement
The RKSport Ram-Air hood is an exterior styling upgrade
Up style the exterior appearance of your Cobalt with the purchase and installation of a performance enhancing and street styling RKSport Ram-Air Hood. Set your Cobalt apart from all the other street machines on the scene and at the same time unleash the sports car that's hidden inside your Cobalt with the addition of the RKSport Ram Air Hood.
R.K. of RKSport Inc, has an extensive racing background and realized early on that having the best designers and technical experts on the team makes for a winning program in both racing and business. In 1992 R.K. co-founded Swift Cars and started developing the Swift Formula Ford. In 1993 with his experiences both on and off the track, R.K. founded RKSport, Inc. a leader in after market aerodynamic styling elements for the street and the track.
RKSport's best in-house designers have, once again, outdone themselves with the designing of this very stylish and functional Ram-Air Hood which will not only sets your Cobalt apart from the crowd but also offers you added performance by increasing your Cobalt's horsepower by channeling and ramming more air into the throttle body.
The RKSport Ram-Air Hood was designed to minimize drag, and to be the most efficient ram-air hood on the market at collecting and ramming air into the throttle body thereby increasing horsepower and performance.
Constructed from hand laid up, high impact fiberglass, RK Sport's fully functional Ram-Air Hood will fit all 05-Up 2-door and 4-door Cobalts.
All RKSport products come with OEM style mounting hardware if required and detailed instructions for easy installation.
All RKSport Ram-Air Hood are manufactured from the highest quality fiberglass obtainable for flexibility, durability and impact resistance.
Cobaltmania.com has a full line of RKSport exterior styling products for the Chevy Cobalt.
Cobaltmania.com where the customers come first.
The RKSport Ram-Air Hood is constructed of high quality high impact fiberglass
The RKSport Ram-Air Hood sets your Cobalt apart from the crowd
The RKSport Ram-Air Hood rams more air into your throttle body
The RKSport Ram-Air hood increases horsepower
The RKSport Ram-Air hood a performance enhancement
The RKSport Ram-Air hood is an exterior styling upgrade
Subscribe to:
Posts (Atom)
